Build Your Door
This is Stock Model
Depending on Configuration
Lead time 7 - 14 Business Days
24" x 80" - $427.40
30" x 80" - $427.40
32" x 80" - $427.40
36" x 80" - $427.40
24" x 84" - $555.00
24" x 92 1/2" - $555.00
30" x 84" - $555.00
30" x 92 1/2" - $555.00
32" x 84" - $555.00
32" x 92 1/2" - $555.00
36" x 84" - $555.00
36" x 92 1/2" - $555.00
The Avanti Vetro Interior Door has a horizontal line design that will instantly catch your attention. The black apricot finish is broken up by silver strips which separate the door into five block sections. All five blocks have the veneer flowing to the border creating a sense of running water.
The center of the door contains a strong tempered glass piece mounted on raised moldings, and there is enough thickness around the border of the glass for the character of the Avanti Vetro door horizontal design to be seen.
The Avanti Vetro Interior Door Black Apricot comes already treated, and the finished door is polished, resulting in a semi-gloss veneer. We use only the finest materials to create our high quality doors, and we are also pleased to provide a two year warranty for all of the doors we sell.
Doors And Beyond happy to offer knocked down prehung doors that are easy to assemble and to install. Door slabs and Jambs are precisely pre-machined to exact match each other at the assemblage points. Jambs and casings are carefully packed and shipped together with door slabls. Every piece is labeled to make assembly and installation quick and easy at the job site.
See picture below in order to know how to accurately measure rought opening. First, three times measure the widths between the studs of the entryway. On picture 1 they are highlighted with arrowed lines and A, B, C. Be sure to record the smallest width of the 3 measurements. Second, measure the height on both sides (see picture 2 A, B lines) and also record the smallest measurement.
From your rough opening width subtract 2 1/2", and 1 1/4" from the height. This will determine your door slab size
A Swinging Door itself can't be used in a proper way without its frame. Our door frames consist from the following components: Single Rabbeted Jambs, L-shaped Casings, Flat Casings (optional). A Door slab gets attached to one of the Jambs. The Casings are applied around the door into the jambs for decorating purposes. All components are finished with the same finish as the door slab.
Made from solid wood or marine plywood base. The door stop inlays a rubber seal.
The thickness of the door jamb is 3 7/8”, which is adjustable to 4 7/8” using the L-Casing molding.
Made from high-pressed MDF. Adjust the thickness of the frame up to 4 7/8" thanks to L-shaped construction.
Door casings width: 2 13/16”
Single rabbeted Jambs made from marine plywood base with a rubber sealed high-pressed MDF door stop. The jamb has two 3/4" deep grooves from both sides. The thickness of the door jamb is 3 7/8”, which is adjustable to 4 7/8” using the L-Casing molding. Casings are applied around the door jamb, which are the same finish as the door. Both Jamb and Casing are covered by natural wood veneer.
Rubber seal used for noise insulation and shock absorption when closing the door, as well as helping to reduce dust in the room. It is important that the rubber seal in the door frame should be bland.
Jamb Extensions are additional parts for extending the door frame. If the wall thickness is greater than this standard jamb width, extensions must be used. Jamb width extensions come in identical Veneer finishes as the Door. Standard frame covers 3 7/8” to 4 7/8”. Jamb extensions give you the ability to cover additional widths.
Take your wall thickness measurement from edge to edge (as illustrated here). Please note that sheetrock thickness is also considered in a total measurement sum.
All steel base material. Plain bearings. Full mortise. Finishes: Polished Chrome; Satin Nickel; Polished Brass
Size: 3.5” x 3.5” square hinge. 2 to 4 hinges per door (depending on door size).
A Knocked Down doors will have pre-machined mortise an European Magnetic Lockset.
A Knocked Down Door will have pre-drilled bore for a handle with 2 3/8” backset.
Bore diameter will be 2 1/8” Backset is the distance from the edge of the door to the center of the bore hole
Please note: If you don't need handle preparation, or need an extra pre-drill for deadbolt contact us at [email protected] or call 866-553-6677
Swing direction refers to the hinged side of the door and the way the door swings: inside or outside of the room or home. It is important to choose correct swing direction. In some cases pre-hung door with wrong chosen swing direction could not be reversed.
Please review the illustrations below in order to have clear understanding of door swing directions.
Left or Right Hand means that hinged side of the door is located from your left or right hand side accordingly. Location where you are standing when determining swing direction is considered as outside.
DoorsAndBeyond.com Shipping rates:
|Number of doors||Continental United States|
|Orders over 15 doors||Please Contact Us|
Door levers- FREE Shipping
DoorsAndBeyond.com ships anywhere in the US and Canada (Buyer is responsible for filling out customs form for shipments to Canada). The turnaround time of a placed order may vary and DoorsAndBeyond.com does not hold responsibilities for any delayed shipments. We do not ship to APO, FPO, or PO boxes. We need a valid street address in order to process the order. If you made a mistake regarding the delivery address, you must contact us within 12 hours of placing an order. If the product is shipped out to a wrong address, the buyer carries responsibilities to any additional shipping charges.
Doors are shipped via freight ground services and the shipments are insured by the shipping carrier. Prior to making a delivery, someone from a freight company will contact you to schedule a drop off day and time that is convenient to you. Make sure that there will be someone to accept the product upon the delivery. Failure to do so, might result in re-delivery charge that you will be responsible for. All shipments are delivered to the back of the truck. Lift gate services, inside delivery and white glove services are optional and you must contact us for these services(charges will apply ). Drivers are not required to assist in removing of the product from the truck, but they often do assist customers that will reward them with tips. However, doors are a heavy commodity that will require 2-3 people to be present and active of removing the product from the truck. During unloading of products from the truck, DoorsAndBeyond.com, assumes no responsibilities or liability for damage of the product, personal injury to someone, or any other issue that may arise due to moving the product from the truck to the inside space.
Customer is responsible to inspect all the elements of the shipped product and indicate any shortage or damage, BEFORE signing on the freights company’s paperwork. If the customer finds any concealed damage with the shipment after the driver leaves, they must contact the freight company to file a claim.
If there are items missing, you must indicate that on paper work and notify us immediately, but DO NOT REFUSE the delivery. We would need pictures and other indications of the missing parts in order for us to send a replacement.
ACCEPTANCE OF SHIPMENT AND SIGNING THE DELIVERY RECEIPT BY YOU OR YOUR REPRESENTATIVES IS AN ACKNOWLEDGMENT THAT:
If the delivery driver refuses inspection, please note on the delivery receipt the following: “POSSIBLE CONCEALED DAMAGE. DRIVER WILL NOT ALLOW ME TO EXAMINE FREIGHT” and then sign where required. If these terms are not followed we cannot be liable for any replacements.
DoorsAndBeyond.com is responsible for making payments to the shipping and delivery vendors directly. You, the customer, do NOT have to pay anything to the truckers at the time of delivery or at any other time. Any and all such payments, if made by the customer to the carrier company or its representatives, for any additional or existing services will be at your sole discretion and cost. You agree that DoorsAndBeyond.com will not refund such payments under any circumstances.
Interior Doors Installation is a quite complex process and in order to successfully perform this task some professional skills and tools are required.
We are happy to offer you installation instructions that we prepared for you in a very simple and intuitive manner.
Please download, review and show it to your contractor/installer.
If for any reason you will have difficulties or issues with installation of Arazzinni Doors you can contact us during our working office hours.
Our selected interior door product requires no further treatments of the door slabs or casings. However, in order to keep the product at its best appearance, we recommend using wood cleaning products with an addition of hard wax. One of the products that we highly recommend is Behold® Furniture Polish. Behold® Furniture Polish protects finished surfaces with a long lasting hard wax finish. In addition, to the protective feature, it has lemon scent, which most people seem to enjoy! We recommend using the product as often as you clean it.
Another important thing that arises in the process of selecting an interior or exterior door is manufacturer's warranty. We've got you covered and proud to introduce that all Arazzinni brand doors are covered by 2-years manufacture warranty. To download and review our warranty statements please follow the links below.
Arazzinni is the fastest growing provider of European and custom interior and exterior doors in the United States. Choose from more than 100 ready-made options or customize your own. Arazzinni team will work with designers to create custom fabricated doors to accommodate any request.
Wholesale distribution center is located in Rahway, NJ, with four manufacturing plants throughout Eastern Europe. Since their inception in 2009, they have sold more than 20,000 doors across the country. In 2015, Arazzinni will expand their reach globally to Eastern European, Middle Eastern, and Canadian markets. Arazzinni is confident in all projected growth as they continue to offer customers the best price, quality, and service.
|Model Name||Arazzinni Avanti Vetro Interior Door|
|Door Slab Sizes||23 13/16”: 29 13/16”: 31 13/16”: 35 13/16”|
|Door Slab Height||79 3/8”|
|Door Slab Thickness||1 3/4”|
|Jamb Width||3 7/8”|
|Wall covered by jamb with adjustable casing||3 7/8” to 4 7/8”|
|Door Casing width||2 13/16”|
|Middle Panel Construction||Natural Italian Black Apricot wood veneer in horizontal direction decorated with 4 silver strips with frosted glass insert containing horizontal line design; raised molding|
|Stile Construction||Solid wood core covered with a natural wood veneer finish|
|Glass Type||Tempered (Safety)|
|Warranty||2 Years Manufacturer's Warranty|
order a call
Enter your phone number
Get free samples
Check qualityGet free samples
get Free samples